Flat pack or assembled,
delivered to Springfield.
Springfield is one freight run from our door in Rockhampton. What arrives is a kitchen drawn for your room, in 18mm moisture-resistant board with Blum hardware throughout.
The short answer
Every cabinet is cut to your wall lengths rather than picked from catalogue widths, then freighted to Springfield south along the Bruce Highway. 18mm moisture-resistant board, laser-bonded edging and Blum hardware as standard. Installation in Springfield is by your builder or kitchen installer, working from the dimensioned service drawings that ship with the order.
What a kitchen is up against in Springfield
Resale sits behind most kitchens in these suburbs, and a buyer reads a kitchen in about four seconds. What carries that is alignment: even gaps, doors that sit flush, drawers that close themselves. All three are hardware and assembly, not budget. Freight lands daily, which makes Brisbane the cheapest capital for us to reach and the easiest place to compare our quote against a local one.
How it reaches Springfield
Your kitchen is cut in Rockhampton and freighted south along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Springfield
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Appliances: yours or ours
Most Springfield orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
What ships with the order
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Springfield plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
Comparing our quote with a local one
Take our itemised quote to any Springfield cabinetmaker and compare it line for line, which is exactly what it is formatted for. Ask them three things: board thickness and moisture rating, edging method, hardware brand. If the answers match ours and the number is better, take theirs - a local supplier with the same specification and no freight line is a genuinely good outcome. If the answers are vague, you have learned something either way.
Around Greater Brisbane
We ship to Ipswich, Logan, the Redlands, Caboolture, Redcliffe, North Lakes on the same route. The Greater Brisbane page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Springfield
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
Between the humidity and the summer storms, the parts of a kitchen that suffer here are the ones nobody photographs — the sink cabinet floor, the edge behind the dishwasher. Moisture-resistant board is specified for exactly those.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Springfield — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Springfield?
Yes. Springfield is served south along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Springfield?
No. Our own installation team works Central Queensland only. In Springfield your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Springfield?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Brisbane orders go flat.
Who can do the plumbing and electrical in Springfield?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Springfield quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Rangehood set into assembled overheads
Drawer fronts aligned on the bench, not on site
American oak and stone
Springfield, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Springfield kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.