A kitchen drawn for Ipswich,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to Ipswich with the hardware bagged against the cabinet it belongs to.
The short answer
Yes, we ship to Ipswich. The kitchen is drawn to your measurements, cut in Rockhampton and freighted south along the Bruce Highway. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
The brief Ipswich actually sets
Tight entries, shared driveways and a lift if you are lucky. Measuring the path from the truck to the room matters as much as measuring the room, and it is the question that usually decides flat pack over assembled on these jobs. Freight lands daily, which makes Brisbane the cheapest capital for us to reach and the easiest place to compare our quote against a local one.
The run to Ipswich
Your kitchen is cut in Rockhampton and freighted south along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Ipswich
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What happens if something arrives damaged
Check the delivery against the numbered drawing on the day it lands in Ipswich, before the truck leaves if you can. Count the cartons, look at the door and drawer fronts. If a panel is damaged or a carton is missing, photograph it and ring the studio the same day. A replacement is cut from the drawing we hold on file, so it matches the rest of the kitchen rather than being re-measured from scratch.
Why there is no design software
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Ipswich kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
What the quote actually itemises
Every cabinet as its own line with its width and what is in it, the benchtop by material and linear metre, the hardware by brand, the doors by finish, and freight to your Ipswich postcode on a line of its own. No allowances, no provisional sums, no "from" price with the catches left out. If you take an item off, you see exactly what comes off the total, which is the point of itemising it in the first place.
Around Greater Brisbane
We ship to Logan, the Redlands, Caboolture, Redcliffe, Springfield, North Lakes on the same route. The Greater Brisbane page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Ipswich
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
Summers here are humid enough that the cheap end of flat pack fails at the sink and dishwasher first, usually inside five years. Moisture-resistant board and laser-bonded edging are standard on every cabinet we cut.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Ipswich — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Ipswich?
Yes. Ipswich is served south along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Ipswich?
No. Our own installation team works Central Queensland only. In Ipswich your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Ipswich?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Brisbane orders go flat.
Who can do the plumbing and electrical in Ipswich?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Ipswich?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Kitchenette, delivered assembled
Full-height stone splashback
A long run arrives as numbered assembled units
Ipswich, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Ipswich kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.