A kitchen drawn for Mossman,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to Mossman with the hardware bagged against the cabinet it belongs to.
The short answer
Yes, we ship to Mossman. The kitchen is drawn to your measurements, cut in Rockhampton and freighted north along the Bruce Highway. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
The brief Mossman actually sets
Out here a missing bracket is not an inconvenience, it is a fortnight. Everything is packed against a numbered drawing and checked before it leaves, because the cost of getting it wrong is measured in distance rather than dollars. Wet-season humidity here is the hardest test a kitchen carcass gets anywhere in Australia, and it is the reason we do not sell 16mm standard board at all.
The run to Mossman
Your kitchen is cut in Rockhampton and freighted north along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Mossman
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Benchtops, and why they are separate
Laminate ships with the kitchen. Stone does not, and it should not: a stone benchtop is templated off the cabinets after they are installed and level, by a fabricator near you in Mossman, because a slab cut to a drawing rather than to the room is a slab that does not fit. We quote the cabinetry and the laminate; for stone we tell you the cut-out sizes and the fabricator works from the installed run.
Why there is no design software
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Mossman kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
Second-dwelling and rental kitchens
A good share of what we ship to Mossman goes into secondary dwellings, granny flats and rentals. Those kitchens fail in a predictable order - edging near the sink, then drawer runners, then hinge adjustment - and all three are specification, not bad luck. The board, edging and hardware we ship as standard are chosen so the rental kitchen and the owner kitchen are the same kitchen.
Around Far North Queensland
We ship to Port Douglas, Mareeba, Atherton, Innisfail, Tully, Cooktown, Weipa, Gordonvale on the same route. The Far North Queensland page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Mossman
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
A kitchen here spends months in air that never really dries out. That is why we will not quote 16mm standard board at any price — it is the cheaper option that costs the most, because a swollen carcass cannot be adjusted back into square.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Mossman — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Mossman?
Yes. Mossman is served north along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Mossman?
No. Our own installation team works Central Queensland only. In Mossman your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Mossman?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Far North Queensland orders go flat.
Who can do the plumbing and electrical in Mossman?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Mossman?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Laser-bonded edging, no glue line
Blum runners fitted before it leaves
New build, kitchen fitted at fit-off
Mossman, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Mossman kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.