Wyong kitchens,
cut to your room.
A kitchen cut to your measurements rather than picked from catalogue widths, packed flat for the run to Wyong or delivered with the doors already hung and adjusted.
The short answer
We design and cut every kitchen in Rockhampton, Queensland, and freight it to Wyong south along the Pacific Highway — flat packed, or delivered assembled with the doors already hung and adjusted. We do not install in Wyong; your own builder or installer fits it from our drawings. Send the room dimensions and the quote comes back both ways, fixed and itemised, with freight to your postcode on its own line.
What Wyong housing does to a kitchen
Access is usually the deciding factor here — townhouses, units, narrow hallways, stairs. A flat carton goes where an assembled cabinet cannot, and it is often the only way to get a full kitchen into the room without taking a window out. Salt air and a lot of 1970s brick houses being opened up, which usually means the run gets longer and the island arrives.
Getting it to Wyong
Your kitchen is cut in Rockhampton and freighted south along the Pacific Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Wyong
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Why there is no design software
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Wyong kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
Measuring from Wyong without us there
Because we do not visit Wyong, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Ordering in stages
Not every Wyong job needs the whole kitchen at once. Builders regularly take the base run first and the overheads and pantry later, and renovators sometimes take the kitchen now and the laundry in six months. The drawing stays on file, so a later order matches the first exactly - same board, same colour batch where we can, same hardware. Say so on the quote request and it is priced in stages.
Around the NSW Central Coast
We ship to Gosford, Terrigal, The Entrance, Woy Woy on the same route. The the NSW Central Coast page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Wyong
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Cold mornings and hot afternoons in the same day are hard on a cabinet. Materials expand and contract, glued edging works loose at the corners, and doors drift out of alignment. A fused edge and three-way adjustable Blum hinges are the answer to both halves of that.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Wyong — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Wyong?
Yes. Wyong is served south along the Pacific Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Wyong?
No. Our own installation team works Central Queensland only. In Wyong your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Wyong?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the NSW Central Coast orders go flat.
Who can do the plumbing and electrical in Wyong?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Wyong order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Rangehood set into assembled overheads
Black joinery, marble bar
New build, kitchen fitted at fit-off
Wyong, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Wyong kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.