A kitchen worth keeping,
freighted into Port Lincoln.
A kitchen is not a product you pick off a shelf and hope fits. Send us what the room actually measures and we will draw Port Lincoln a kitchen to those numbers, then price it with nothing hidden in it.
The short answer
Yes. Nothing about Port Lincoln changes the product: 18mm moisture-resistant board, laser-bonded edging and soft-close hardware on every cabinet, cut to your drawing and freighted west via the Eyre Highway. What changes is the freight line on the quote and who fits it, because installation outside Central Queensland is your own builder or installer rather than us.
What should a Port Lincoln kitchen be built to survive?
Salt air is relentless on hardware. It gets into unbranded runners and hinges and they stiffen, then sag, and the doors stop lining up. Every cabinet runs soft-close hinges and full-extension runners. Long coastlines, salt air and towns where the nearest cabinetmaker is two hours away.
What does delivery to Port Lincoln involve?
Your kitchen is cut in Rockhampton and freighted west via the Eyre Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Port Lincoln?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in South Australia that is SA Consumer and Business Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Would a kitchenette suit the room better?
If the room in Port Lincoln is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
What if the walls in Port Lincoln are not square?
They will not be. Almost no wall in any house is, which is why every run is drawn with scribe allowance at the ends and why we ask for wall measurements at three heights rather than one. The scribe pieces are the strips that take up the difference between a square cabinet and a wall that leans. They ship with the order, and your installer cuts them to the wall on the day.
Where should the cartons sit before the trades arrive?
Somewhere dry, flat and off a concrete slab. Packed panels are fine stored flat and stacked, and they are not fine leaning against a wall for a fortnight or sitting where a slab can wick moisture into them. A garage on timber bearers or a couple of pallets is ideal. Open the cartons and check them against the drawing when they arrive, then close them again.
Where else do you ship in the Yorke and Eyre Peninsulas?
We ship to Whyalla, Port Augusta, Kadina, Ceduna, Moonta, Wallaroo, Minlaton, Tumby Bay and the rest of the region on the same route. The the Yorke and Eyre Peninsulas page covers the region, and South Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Port Lincoln
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in South Australia.
The specification
Built for this
climate, not a catalogue.
The seasonal swing here moves timber and board more than a steady climate does, and the joint that gives first is almost always the edge. Laser-bonded edging is fused to the panel rather than glued to it, so there is no seam to lift.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Soft-close hinges and full-extension runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
What goes inside it
Anyone can sell you boxes.
This is the part that takes knowing.
Carcasses and doors decide how long it lasts. The fittings decide whether you like using it — and most suppliers charge for them at the end. These are included in your Port Lincoln kitchen, not quoted as extras once the number is agreed. That is the difference, and it is the one most suppliers will not match.
Plate and pot racks
Pegs and rails inside a deep drawer so plates stand up and pots stop stacking into each other.
See how it works →
Pull-down wall basket
The top shelf of an overhead, brought down to where you can reach it. The shelf you stopped using becomes storage again.
See how it works →
Drawer organisers
Cutlery, knives and spices in fitted trays cut to the drawer, instead of a plastic tray that slides around in it.
See how it works →There are seven in all — see the full range.
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call (07) 4863 5788 — you get the person who designs it.
Frequently asked
Port Lincoln — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Port Lincoln?
Yes. Port Lincoln is served west via the Eyre Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Port Lincoln?
No. Our own installation team works Central Queensland only. In Port Lincoln your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Port Lincoln?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Yorke and Eyre Peninsulas orders go flat.
Who can do the plumbing and electrical in Port Lincoln?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In South Australia, SA Consumer and Business Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and soft-close hinges and full-extension runners on every cabinet, in every state, with the hardware brand named on your quote. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Port Lincoln order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Can I add pull-downs and organisers to a Port Lincoln kitchen?
Yes, and they are quoted per item rather than bundled into a package you did not ask for. Pull-down wall baskets, magic corners, tall larder pull-outs and drawer organisers can all go into a Port Lincoln order. If you order delivered assembled they are fitted before it ships; flat packed, they arrive with the cabinet they belong to.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Service drawings for your trades
Stone on a compact run
Kitchen into dining, one palette
Port Lincoln, SA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Port Lincoln kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.