Flat pack or assembled,
delivered to Kingston.
Kingston is one freight run from our door in Rockhampton. What arrives is a kitchen drawn for your room, in 18mm moisture-resistant board with Blum hardware throughout.
The short answer
We design and cut every kitchen in Rockhampton, Queensland, and freight it to Kingston south then by sea across Bass Strait — flat packed, or delivered assembled with the doors already hung and adjusted. We do not install in Kingston; your own builder or installer fits it from our drawings. Send the room dimensions and the quote comes back both ways, fixed and itemised, with freight to your postcode on its own line.
What Kingston housing does to a kitchen
Access is usually the deciding factor here — townhouses, units, narrow hallways, stairs. A flat carton goes where an assembled cabinet cannot, and it is often the only way to get a full kitchen into the room without taking a window out. Cold, damp winters in a lot of uninsulated older housing, which is where cheap board fails first.
Getting it to Kingston
Your kitchen is cut in Rockhampton and freighted south then by sea across Bass Strait. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Kingston
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Tasmania that is Consumer, Building and Occupational Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Appliances: yours or ours
Most Kingston orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
Flat pack or assembled, decided on numbers
The cabinetry price is identical. What differs is the assembly line on the quote and the freight line, because assembled cabinets take several times the truck space of the same kitchen in cartons. To Kingston that difference is usually decisive, and most orders this far out go flat. But the quote shows both, so it is a number you compare rather than a decision you are talked into.
Comparing our quote with a local one
Take our itemised quote to any Kingston cabinetmaker and compare it line for line, which is exactly what it is formatted for. Ask them three things: board thickness and moisture rating, edging method, hardware brand. If the answers match ours and the number is better, take theirs - a local supplier with the same specification and no freight line is a genuinely good outcome. If the answers are vague, you have learned something either way.
Around Hobart and the South
We ship to New Norfolk, Huonville, Sorell on the same route. The Hobart and the South page covers the region, and Tasmania covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Kingston
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Tasmania.
The specification
Built for this
climate, not a catalogue.
Cold, damp winters in older uninsulated housing produce condensation, and condensation sits on the underside of a benchtop and in the back of a sink cabinet where nobody looks. Moisture-resistant board handles that; standard board swells quietly for a year and then lets go.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Kingston — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Kingston?
Yes. Kingston is served south then by sea across Bass Strait, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Kingston?
No. Our own installation team works Central Queensland only. In Kingston your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Kingston?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Hobart and the South orders go flat.
Who can do the plumbing and electrical in Kingston?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Tasmania, Consumer, Building and Occupational Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Kingston order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Rangehood set into assembled overheads
Black joinery, marble bar
Long island, one delivery
Kingston, TAS
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Kingston kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.