Flat pack or assembled,
delivered to Eden.
Eden is one freight run from our door in Rockhampton. What arrives is a kitchen drawn for your room, in 18mm moisture-resistant board with Blum hardware throughout.
The short answer
Every cabinet is cut to your wall lengths rather than picked from catalogue widths, then freighted to Eden south along the Hume corridor. 18mm moisture-resistant board, laser-bonded edging and Blum hardware as standard. Installation in Eden is by your builder or kitchen installer, working from the dimensioned service drawings that ship with the order.
What a kitchen is up against in Eden
A house within reach of sea air is a harder brief than it looks: the finish has to survive the light and the hardware has to survive the salt. We answer the second with Blum on every hinge and runner, and the first with a finish you choose off real samples. Holiday houses that sit empty half the year, which is hard on hardware and unforgiving of cheap runners.
How it reaches Eden
Your kitchen is cut in Rockhampton and freighted south along the Hume corridor. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Eden
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Benchtops, and why they are separate
Laminate ships with the kitchen. Stone does not, and it should not: a stone benchtop is templated off the cabinets after they are installed and level, by a fabricator near you in Eden, because a slab cut to a drawing rather than to the room is a slab that does not fit. We quote the cabinetry and the laminate; for stone we tell you the cut-out sizes and the fabricator works from the installed run.
A kitchenette instead of a kitchen
If the room in Eden is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Measuring from Eden without us there
Because we do not visit Eden, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Around the NSW South Coast
We ship to Batemans Bay, Merimbula, Bega, Narooma, Moruya on the same route. The the NSW South Coast page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Eden
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
The seasonal swing here moves timber and board more than a steady climate does, and the joint that gives first is almost always the edge. Laser-bonded edging is fused to the panel rather than glued to it, so there is no seam to lift.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Eden — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Eden?
Yes. Eden is served south along the Hume corridor, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Eden?
No. Our own installation team works Central Queensland only. In Eden your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Eden?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the NSW South Coast orders go flat.
Who can do the plumbing and electrical in Eden?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Eden quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Service drawings for your trades
Handleless rail on an assembled run
American oak and stone
Eden, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Eden kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.