Cobar kitchens,
cut to your room.
A kitchen cut to your measurements rather than picked from catalogue widths, packed flat for the run to Cobar or delivered with the doors already hung and adjusted.
The short answer
Every cabinet is cut to your wall lengths rather than picked from catalogue widths, then freighted to Cobar west via the Barrier Highway. 18mm moisture-resistant board, laser-bonded edging and Blum hardware as standard. Installation in Cobar is by your builder or kitchen installer, working from the dimensioned service drawings that ship with the order.
What a kitchen is up against in Cobar
Turnover is the enemy. Every tenancy is a fresh set of hands on the same drawers, and cheap runners announce it within a year. What we ship is specified to be boring and repairable, which in a rental is the highest compliment. Extreme dry heat and long freight runs, so cartons and a fixed freight line matter more here than anywhere.
How it reaches Cobar
Your kitchen is cut in Rockhampton and freighted west via the Barrier Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Cobar
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Flat pack or assembled, decided on numbers
The cabinetry price is identical. What differs is the assembly line on the quote and the freight line, because assembled cabinets take several times the truck space of the same kitchen in cartons. To Cobar that difference is usually decisive, and most orders this far out go flat. But the quote shows both, so it is a number you compare rather than a decision you are talked into.
What the quote actually itemises
Every cabinet as its own line with its width and what is in it, the benchtop by material and linear metre, the hardware by brand, the doors by finish, and freight to your Cobar postcode on a line of its own. No allowances, no provisional sums, no "from" price with the catches left out. If you take an item off, you see exactly what comes off the total, which is the point of itemising it in the first place.
What happens if something arrives damaged
Check the delivery against the numbered drawing on the day it lands in Cobar, before the truck leaves if you can. Count the cartons, look at the door and drawer fronts. If a panel is damaged or a carton is missing, photograph it and ring the studio the same day. A replacement is cut from the drawing we hold on file, so it matches the rest of the kitchen rather than being re-measured from scratch.
Around Far West NSW
We ship to Broken Hill, Bourke on the same route. The Far West NSW page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Cobar
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Everything out here is harder on hardware than it is on doors. Fine dust gets into an unsealed runner and turns a soft-close drawer into a grinding one inside a year. Blum is specified for the dust as much as for the warranty.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Cobar — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Cobar?
Yes. Cobar is served west via the Barrier Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Cobar?
No. Our own installation team works Central Queensland only. In Cobar your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Cobar?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Far West NSW orders go flat.
Who can do the plumbing and electrical in Cobar?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Cobar quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Blum runners fitted before it leaves
Service drawings for your trades
Galley layout for a narrow room
Cobar, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Cobar kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.