Custom kitchens
freighted to Tibooburra.
A kitchen is not a product you pick off a shelf and hope fits. Send us what the room actually measures and we will draw Tibooburra a kitchen to those numbers, then price it with nothing hidden in it.
The short answer
Yes. Nothing about Tibooburra changes the product: 18mm moisture-resistant board, laser-bonded edging and Blum soft-close hardware on every cabinet, cut to your drawing and freighted west via the Barrier Highway. What changes is the freight line on the quote and who fits it, because installation outside Central Queensland is your own builder or installer rather than us.
What should a Tibooburra kitchen be built to survive?
A town like this has every decade of Australian housing in it, and each decade has its own kitchen problem. Drawing to the room rather than to a standard width is what lets one supplier handle all of them. Extreme dry heat and long freight runs, so cartons and a fixed freight line matter more here than anywhere.
What does delivery to Tibooburra involve?
Your kitchen is cut in Rockhampton and freighted west via the Barrier Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Tibooburra?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What actually ships with the order?
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Tibooburra plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
What cabinet sizes should I be asking for?
You should not have to ask: the run is drawn to your wall, so the cabinet widths come out of the measurement rather than being chosen from a list. What is worth deciding is the split between drawers and cupboards, because that is the difference you live with. Our cabinet sizes guide covers the standard dimensions that do matter, such as bench height and overhead clearance.
Can I order the kitchen in stages?
Not every Tibooburra job needs the whole kitchen at once. Builders regularly take the base run first and the overheads and pantry later, and renovators sometimes take the kitchen now and the laundry in six months. The drawing stays on file, so a later order matches the first exactly - same board, same colour batch where we can, same hardware. Say so on the quote request and it is priced in stages.
Where else do you ship in Far West NSW?
We ship to Broken Hill, Cobar, Bourke, Menindee, Wilcannia on the same route. The Far West NSW page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Tibooburra
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Hard water marks stone and laminate alike, and dry heat opens up any joint that was not tight to begin with. Neither is solved by a prettier door; both are answered by the board, the edge and the hardware underneath.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Tibooburra — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Tibooburra?
Yes. Tibooburra is served west via the Barrier Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Tibooburra?
No. Our own installation team works Central Queensland only. In Tibooburra your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Tibooburra?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Far West NSW orders go flat.
Who can do the plumbing and electrical in Tibooburra?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Tibooburra quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Drawer fronts aligned on the bench, not on site
Samples brought to you
Galley layout for a narrow room
Tibooburra, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Tibooburra kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.