The kitchen, delivered.
Fitted out, not stripped back.
Drawn to your room in Rockhampton and freighted to Byron Bay, flat packed or delivered assembled. Same board, same Blum hardware, same drawings as every kitchen we build.
The short answer
We design and cut every kitchen in Rockhampton, Queensland, and freight it to Byron Bay south along the Pacific Highway — flat packed, or delivered assembled with the doors already hung and adjusted. We do not install in Byron Bay; your own builder or installer fits it from our drawings. Send the room dimensions and the quote comes back both ways, fixed and itemised, with freight to your postcode on its own line.
What does Byron Bay housing do to a kitchen?
Short-stay and weekender properties get judged on a photograph and then punished by turnover. That combination wants a kitchen that looks like a magazine and behaves like a rental. Subtropical humidity and a flood history that has made people specific about board grade in a way most regions are not.
How does the kitchen get to Byron Bay?
Your kitchen is cut in Rockhampton and freighted south along the Pacific Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Byron Bay?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
Flat pack or assembled — which works out cheaper?
The cabinetry price is identical. What differs is the assembly line on the quote and the freight line, because assembled cabinets take several times the truck space of the same kitchen in cartons. To Byron Bay that difference is usually decisive, and most orders this far out go flat. But the quote shows both, so it is a number you compare rather than a decision you are talked into.
How do I plan around the plumbing I already have?
Keeping the sink and the waste where they are is the single cheapest decision available in a kitchen renovation, and moving them is the one most likely to find a problem inside a wall. If the layout works with the existing points, keep them. If it does not, get the plumber to look before the drawing is approved rather than after the cabinets land in Byron Bay.
Where else do you ship in the Northern Rivers?
We ship to Lismore, Ballina, Tweed Heads, Casino, Grafton, Yamba, Murwillumbah, Alstonville and the rest of the region on the same route. The the Northern Rivers page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Byron Bay
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Between the humidity and the summer storms, the parts of a kitchen that suffer here are the ones nobody photographs — the sink cabinet floor, the edge behind the dishwasher. Moisture-resistant board is specified for exactly those.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Soft-close hinges and full-extension runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
What goes inside it
Anyone can sell you boxes.
This is the part that takes knowing.
Carcasses and doors decide how long it lasts. The fittings decide whether you like using it — and most suppliers charge for them at the end. These are included in your Byron Bay kitchen, not quoted as extras once the number is agreed. That is the difference, and it is the one most suppliers will not match.
Magic corner pull-out
The blind corner stops being the cupboard you empty twice a year. The front tray swings out and the back tray follows it.
See how it works →
Plate and pot racks
Pegs and rails inside a deep drawer so plates stand up and pots stop stacking into each other.
See how it works →
Pull-down wall basket
The top shelf of an overhead, brought down to where you can reach it. The shelf you stopped using becomes storage again.
See how it works →There are seven in all — see the full range.
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call (07) 4863 5788 — you get the person who designs it.
Frequently asked
Byron Bay — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Byron Bay?
Yes. Byron Bay is served south along the Pacific Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Byron Bay?
No. Our own installation team works Central Queensland only. In Byron Bay your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Byron Bay?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Northern Rivers orders go flat.
Who can do the plumbing and electrical in Byron Bay?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and soft-close hinges and full-extension runners on every cabinet, in every state, with the hardware brand named on your quote. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Byron Bay order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Can I add pull-downs and organisers to a Byron Bay kitchen?
Yes, and they are quoted per item rather than bundled into a package you did not ask for. Pull-down wall baskets, magic corners, tall larder pull-outs and drawer organisers can all go into a Byron Bay order. If you order delivered assembled they are fitted before it ships; flat packed, they arrive with the cabinet they belong to.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Stone on a compact run
Tall units arrive as built boxes
Kitchen into dining, one palette
Byron Bay, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Byron Bay kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.