No showroom in Alstonville.
No catalogue widths either.
The cabinetry that goes into a Alstonville kitchen is the same cabinetry we put in our own installed jobs: 18mm moisture-resistant board, laser-bonded edging, Blum hardware. What differs is that your trades fit it rather than ours.
The short answer
Yes. Nothing about Alstonville changes the product: 18mm moisture-resistant board, laser-bonded edging and Blum soft-close hardware on every cabinet, cut to your drawing and freighted south along the Pacific Highway. What changes is the freight line on the quote and who fits it, because installation outside Central Queensland is your own builder or installer rather than us.
What brief does Alstonville actually set?
Out here a missing bracket is not an inconvenience, it is a fortnight. Everything is packed against a numbered drawing and checked before it leaves, because the cost of getting it wrong is measured in distance rather than dollars. Subtropical humidity and a flood history that has made people specific about board grade in a way most regions are not.
What is the run to Alstonville?
Your kitchen is cut in Rockhampton and freighted south along the Pacific Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Alstonville?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Alstonville council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
What does the quote actually itemise?
Every cabinet as its own line with its width and what is in it, the benchtop by material and linear metre, the hardware by brand, the doors by finish, and freight to your Alstonville postcode on a line of its own. No allowances, no provisional sums, no "from" price with the catches left out. If you take an item off, you see exactly what comes off the total, which is the point of itemising it in the first place.
Would a kitchenette suit the room better?
If the room in Alstonville is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Where else do you ship in the Northern Rivers?
We ship to Lismore, Ballina, Byron Bay, Tweed Heads, Casino, Grafton, Yamba, Murwillumbah and the rest of the region on the same route. The the Northern Rivers page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Alstonville
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Between the humidity and the summer storms, the parts of a kitchen that suffer here are the ones nobody photographs — the sink cabinet floor, the edge behind the dishwasher. Moisture-resistant board is specified for exactly those.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Alstonville — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Alstonville?
Yes. Alstonville is served south along the Pacific Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Alstonville?
No. Our own installation team works Central Queensland only. In Alstonville your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Alstonville?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Northern Rivers orders go flat.
Who can do the plumbing and electrical in Alstonville?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Alstonville?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Full-height stone splashback
Tall units arrive as built boxes
Appliance garage, hardware fitted before delivery
Alstonville, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Alstonville kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.