A kitchen drawn for Woden,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to Woden with the hardware bagged against the cabinet it belongs to.
The short answer
Every cabinet is cut to your wall lengths rather than picked from catalogue widths, then freighted to Woden south along the Newell and Hume highways. 18mm moisture-resistant board, laser-bonded edging and Blum hardware as standard. Installation in Woden is by your builder or kitchen installer, working from the dimensioned service drawings that ship with the order.
What a kitchen is up against in Woden
Resale sits behind most kitchens in these suburbs, and a buyer reads a kitchen in about four seconds. What carries that is alignment: even gaps, doors that sit flush, drawers that close themselves. All three are hardware and assembly, not budget. Genuinely cold winters, a lot of townhouses with tight access, and a rental market that turns over hard.
How it reaches Woden
Your kitchen is cut in Rockhampton and freighted south along the Newell and Hume highways. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Woden
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in the ACT that is Access Canberra. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Comparing our quote with a local one
Take our itemised quote to any Woden cabinetmaker and compare it line for line, which is exactly what it is formatted for. Ask them three things: board thickness and moisture rating, edging method, hardware brand. If the answers match ours and the number is better, take theirs - a local supplier with the same specification and no freight line is a genuinely good outcome. If the answers are vague, you have learned something either way.
Appliances: yours or ours
Most Woden orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
Second-dwelling and rental kitchens
A good share of what we ship to Woden goes into secondary dwellings, granny flats and rentals. Those kitchens fail in a predictable order - edging near the sink, then drawer runners, then hinge adjustment - and all three are specification, not bad luck. The board, edging and hardware we ship as standard are chosen so the rental kitchen and the owner kitchen are the same kitchen.
Around the ACT and region
We ship to Gungahlin, Tuggeranong, Belconnen on the same route. The the ACT and region page covers the region, and the ACT covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Woden
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in the ACT.
The specification
Built for this
climate, not a catalogue.
Cold, damp winters in older uninsulated housing produce condensation, and condensation sits on the underside of a benchtop and in the back of a sink cabinet where nobody looks. Moisture-resistant board handles that; standard board swells quietly for a year and then lets go.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Woden — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Woden?
Yes. Woden is served south along the Newell and Hume highways, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Woden?
No. Our own installation team works Central Queensland only. In Woden your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Woden?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the ACT and region orders go flat.
Who can do the plumbing and electrical in Woden?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In the ACT, Access Canberra is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Woden quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Kitchenette, delivered assembled
Tall units arrive as built boxes
Island with seating overhang
Woden, ACT
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Woden kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.