Nambucca Heads kitchens,
cut to your room.
Cut to your wall lengths and your ceiling height, pre-drilled, labelled per cabinet and freighted to Nambucca Heads flat or assembled. You decide which after you see both on the same quote.
The short answer
Yes, we ship to Nambucca Heads. The kitchen is drawn to your measurements, cut in Rockhampton and freighted south along the Pacific Highway. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
What is a kitchen up against in Nambucca Heads?
Near the water it is never the doors that go first, it is everything that moves. Salt finds the cheapest component in the kitchen and works on it. Specifying the hardware properly at the start is most of what a coastal kitchen needs. Retirement and holiday-let building, which means kitchenettes and compact kitchens outnumber full renovations.
How is a Nambucca Heads order freighted?
Your kitchen is cut in Rockhampton and freighted south along the Pacific Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Nambucca Heads?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What goes wrong with cheap cabinetry first?
In a predictable order: the edging lifts near the sink and the dishwasher, then water gets into the exposed core and the panel swells, then the drawer runners start to drag, then the doors stop lining up because the hinges have no adjustment left. None of that is bad luck. It is what 16mm standard-core board with glued edging and unbranded hardware does, and it is the reason we do not sell it.
Do I supply the appliances, or do you?
Most Nambucca Heads orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
What cabinet sizes should I be asking for?
You should not have to ask: the run is drawn to your wall, so the cabinet widths come out of the measurement rather than being chosen from a list. What is worth deciding is the split between drawers and cupboards, because that is the difference you live with. Our cabinet sizes guide covers the standard dimensions that do matter, such as bench height and overhead clearance.
Where else do you ship in the Mid North Coast?
We ship to Coffs Harbour, Port Macquarie, Taree, Kempsey, Forster, Wauchope, Laurieton, South West Rocks and the rest of the region on the same route. The the Mid North Coast page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Nambucca Heads
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Between the humidity and the summer storms, the parts of a kitchen that suffer here are the ones nobody photographs — the sink cabinet floor, the edge behind the dishwasher. Moisture-resistant board is specified for exactly those.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Soft-close hinges and full-extension runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
What goes inside it
Anyone can sell you boxes.
This is the part that takes knowing.
Carcasses and doors decide how long it lasts. The fittings decide whether you like using it — and most suppliers charge for them at the end. These are included in your Nambucca Heads kitchen, not quoted as extras once the number is agreed. That is the difference, and it is the one most suppliers will not match.
Drawer organisers
Cutlery, knives and spices in fitted trays cut to the drawer, instead of a plastic tray that slides around in it.
See how it works →
Deep drawer fit-out
Dividers and rails that keep a deep drawer from turning into a single pile you dig through.
See how it works →
Tall larder pull-out
Full-height tiers on runners, so nothing lives at the back where you forget you bought it.
See how it works →There are seven in all — see the full range.
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call (07) 4863 5788 — you get the person who designs it.
Frequently asked
Nambucca Heads — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Nambucca Heads?
Yes. Nambucca Heads is served south along the Pacific Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Nambucca Heads?
No. Our own installation team works Central Queensland only. In Nambucca Heads your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Nambucca Heads?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Mid North Coast orders go flat.
Who can do the plumbing and electrical in Nambucca Heads?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and soft-close hinges and full-extension runners on every cabinet, in every state, with the hardware brand named on your quote. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Nambucca Heads?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Can I add pull-downs and organisers to a Nambucca Heads kitchen?
Yes, and they are quoted per item rather than bundled into a package you did not ask for. Pull-down wall baskets, magic corners, tall larder pull-outs and drawer organisers can all go into a Nambucca Heads order. If you order delivered assembled they are fitted before it ships; flat packed, they arrive with the cabinet they belong to.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Service drawings for your trades
Black joinery, marble bar
Timber island, stone top
Nambucca Heads, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Nambucca Heads kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.