Launceston kitchens,
cut to your room.
No showroom, no design portal and no catalogue of fixed widths. You send the measurements and the photographs, a designer draws your Launceston kitchen, and the quote comes back fixed and itemised with freight on its own line.
The short answer
Yes, we ship to Launceston. The kitchen is drawn to your measurements, cut in Rockhampton and freighted south then by sea across Bass Strait. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
What does Launceston housing do to a kitchen?
Older housing stock means walls that are not straight and ceilings that are not level, and a catalogue kitchen deals with both by filling the gap with a panel. Cutting to the measured room is the difference between a kitchen that fits and one that has been made to fit. Georgian and Federation housing with small original kitchens that almost never suit a catalogue cabinet width.
How does the kitchen get to Launceston?
Your kitchen is cut in Rockhampton and freighted south then by sea across Bass Strait. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Launceston?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Tasmania that is Consumer, Building and Occupational Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
How do I measure from Launceston with nobody visiting?
Because we do not visit Launceston, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Why is there no design portal to log into?
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Launceston kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
What cabinet sizes should I be asking for?
You should not have to ask: the run is drawn to your wall, so the cabinet widths come out of the measurement rather than being chosen from a list. What is worth deciding is the split between drawers and cupboards, because that is the difference you live with. Our cabinet sizes guide covers the standard dimensions that do matter, such as bench height and overhead clearance.
Where else do you ship in Launceston and the North?
We ship to George Town, Scottsdale, Deloraine, Longford, Evandale, Westbury, Bridport on the same route. The Launceston and the North page covers the region, and Tasmania covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Launceston
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Tasmania.
The specification
Built for this
climate, not a catalogue.
Cold, damp winters in older uninsulated housing produce condensation, and condensation sits on the underside of a benchtop and in the back of a sink cabinet where nobody looks. Moisture-resistant board handles that; standard board swells quietly for a year and then lets go.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Soft-close hinges and full-extension runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
What goes inside it
Anyone can sell you boxes.
This is the part that takes knowing.
Carcasses and doors decide how long it lasts. The fittings decide whether you like using it — and most suppliers charge for them at the end. These are included in your Launceston kitchen, not quoted as extras once the number is agreed. That is the difference, and it is the one most suppliers will not match.
Drawer organisers
Cutlery, knives and spices in fitted trays cut to the drawer, instead of a plastic tray that slides around in it.
See how it works →
Deep drawer fit-out
Dividers and rails that keep a deep drawer from turning into a single pile you dig through.
See how it works →
Tall larder pull-out
Full-height tiers on runners, so nothing lives at the back where you forget you bought it.
See how it works →There are seven in all — see the full range.
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call (07) 4863 5788 — you get the person who designs it.
Frequently asked
Launceston — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Launceston?
Yes. Launceston is served south then by sea across Bass Strait, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Launceston?
No. Our own installation team works Central Queensland only. In Launceston your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Launceston?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Launceston and the North orders go flat.
Who can do the plumbing and electrical in Launceston?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Tasmania, Consumer, Building and Occupational Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and soft-close hinges and full-extension runners on every cabinet, in every state, with the hardware brand named on your quote. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Launceston?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Can I add pull-downs and organisers to a Launceston kitchen?
Yes, and they are quoted per item rather than bundled into a package you did not ask for. Pull-down wall baskets, magic corners, tall larder pull-outs and drawer organisers can all go into a Launceston order. If you order delivered assembled they are fitted before it ships; flat packed, they arrive with the cabinet they belong to.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Appliance garage, hardware fitted before delivery
Stone on a compact run
Long island, one delivery
Launceston, TAS
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Launceston kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.