A kitchen drawn for George Town,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to George Town with the hardware bagged against the cabinet it belongs to.
The short answer
Every cabinet is cut to your wall lengths rather than picked from catalogue widths, then freighted to George Town south then by sea across Bass Strait. 18mm moisture-resistant board, laser-bonded edging and Blum hardware as standard. Installation in George Town is by your builder or kitchen installer, working from the dimensioned service drawings that ship with the order.
What a kitchen is up against in George Town
A town like this has every decade of Australian housing in it, and each decade has its own kitchen problem. Drawing to the room rather than to a standard width is what lets one supplier handle all of them. Georgian and Federation housing with small original kitchens that almost never suit a catalogue cabinet width.
How it reaches George Town
Your kitchen is cut in Rockhampton and freighted south then by sea across Bass Strait. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in George Town
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Tasmania that is Consumer, Building and Occupational Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What happens if something arrives damaged
Check the delivery against the numbered drawing on the day it lands in George Town, before the truck leaves if you can. Count the cartons, look at the door and drawer fronts. If a panel is damaged or a carton is missing, photograph it and ring the studio the same day. A replacement is cut from the drawing we hold on file, so it matches the rest of the kitchen rather than being re-measured from scratch.
What ships with the order
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your George Town plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
Measuring from George Town without us there
Because we do not visit George Town, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Around Launceston and the North
We ship to Launceston, Scottsdale, Deloraine on the same route. The Launceston and the North page covers the region, and Tasmania covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in George Town
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Tasmania.
The specification
Built for this
climate, not a catalogue.
The cold itself is not the problem. The problem is the damp that comes with it, settling in the parts of a kitchen that never get looked at until a door stops closing. Moisture-resistant board and a fused edge are specified for those places.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
George Town — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to George Town?
Yes. George Town is served south then by sea across Bass Strait, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in George Town?
No. Our own installation team works Central Queensland only. In George Town your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to George Town?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Launceston and the North orders go flat.
Who can do the plumbing and electrical in George Town?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Tasmania, Consumer, Building and Occupational Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a George Town quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Drawer fronts aligned on the bench, not on site
Handleless rail on an assembled run
Navy cabinetry, open-plan island
George Town, TAS
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your George Town kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.