Flat pack kitchens
delivered to Broome.
Drawn to your room in Rockhampton and freighted to Broome, flat packed or delivered assembled. Same board, same Blum hardware, same drawings as every kitchen we build.
The short answer
We design and cut every kitchen in Rockhampton, Queensland, and freight it to Broome west across the Nullarbor — flat packed, or delivered assembled with the doors already hung and adjusted. We do not install in Broome; your own builder or installer fits it from our drawings. Send the room dimensions and the quote comes back both ways, fixed and itemised, with freight to your postcode on its own line.
What Broome housing does to a kitchen
Salt air is relentless on hardware. It gets into unbranded runners and hinges and they stiffen, then sag, and the doors stop lining up. Every cabinet runs Blum soft-close hinges and full-extension runners as standard. Wet-season humidity as hard as Far North Queensland, with freight distances that make a carton the only sensible format.
Getting it to Broome
Your kitchen is cut in Rockhampton and freighted west across the Nullarbor. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Broome
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Western Australia that is the WA Building and Energy division. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What ships with the order
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Broome plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
Measuring from Broome without us there
Because we do not visit Broome, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Ordering in stages
Not every Broome job needs the whole kitchen at once. Builders regularly take the base run first and the overheads and pantry later, and renovators sometimes take the kitchen now and the laundry in six months. The drawing stays on file, so a later order matches the first exactly - same board, same colour batch where we can, same hardware. Say so on the quote request and it is priced in stages.
Around the Kimberley
We ship to Kununurra, Derby on the same route. The the Kimberley page covers the region, and Western Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Broome
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Western Australia.
The specification
Built for this
climate, not a catalogue.
Humidity is the design constraint here, not heat. Through the wet season a standard-core carcass takes on moisture at the cut edges and swells, and once a panel has swollen the door never sits square again. Everything we ship is 18mm moisture-resistant board with laser-bonded edging — no glue line for water to track along.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Broome — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Broome?
Yes. Broome is served west across the Nullarbor, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Broome?
No. Our own installation team works Central Queensland only. In Broome your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Broome?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Kimberley orders go flat.
Who can do the plumbing and electrical in Broome?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Western Australia, the WA Building and Energy division is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Broome order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Tall units arrive as built boxes
Blum runners fitted before it leaves
Full-height joinery, fitted in days
Broome, WA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Broome kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.