A kitchen drawn for Melton,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to Melton with the hardware bagged against the cabinet it belongs to.
The short answer
We design and cut every kitchen in Rockhampton, Queensland, and freight it to Melton south along the Newell and Hume highways — flat packed, or delivered assembled with the doors already hung and adjusted. We do not install in Melton; your own builder or installer fits it from our drawings. Send the room dimensions and the quote comes back both ways, fixed and itemised, with freight to your postcode on its own line.
What Melton housing does to a kitchen
Access is usually the deciding factor here — townhouses, units, narrow hallways, stairs. A flat carton goes where an assembled cabinet cannot, and it is often the only way to get a full kitchen into the room without taking a window out. The most competitive flat pack market in the country, and the one where the board and hardware specification is worth reading twice.
Getting it to Melton
Your kitchen is cut in Rockhampton and freighted south along the Newell and Hume highways. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Melton
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Victoria that is the Victorian Building Authority. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Ordering in stages
Not every Melton job needs the whole kitchen at once. Builders regularly take the base run first and the overheads and pantry later, and renovators sometimes take the kitchen now and the laundry in six months. The drawing stays on file, so a later order matches the first exactly - same board, same colour batch where we can, same hardware. Say so on the quote request and it is priced in stages.
Second-dwelling and rental kitchens
A good share of what we ship to Melton goes into secondary dwellings, granny flats and rentals. Those kitchens fail in a predictable order - edging near the sink, then drawer runners, then hinge adjustment - and all three are specification, not bad luck. The board, edging and hardware we ship as standard are chosen so the rental kitchen and the owner kitchen are the same kitchen.
Appliances: yours or ours
Most Melton orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
Around Greater Melbourne
We ship to Werribee, Frankston, Dandenong, Ringwood, Craigieburn, Pakenham, Sunbury on the same route. The Greater Melbourne page covers the region, and Victoria covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Melton
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Victoria.
The specification
Built for this
climate, not a catalogue.
Cold mornings and hot afternoons in the same day are hard on a cabinet. Materials expand and contract, glued edging works loose at the corners, and doors drift out of alignment. A fused edge and three-way adjustable Blum hinges are the answer to both halves of that.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Melton — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Melton?
Yes. Melton is served south along the Newell and Hume highways, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Melton?
No. Our own installation team works Central Queensland only. In Melton your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Melton?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Melbourne orders go flat.
Who can do the plumbing and electrical in Melton?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Victoria, the Victorian Building Authority is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Melton order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Laser-bonded edging, no glue line
Full-height stone splashback
Full-height joinery, fitted in days
Melton, VIC
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Melton kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.