A kitchen drawn for Echuca,
not for a catalogue.
Every cabinet cut to your wall lengths and ceiling height, pre-drilled, labelled and freighted to Echuca with the hardware bagged against the cabinet it belongs to.
The short answer
Yes, we ship to Echuca. The kitchen is drawn to your measurements, cut in Rockhampton and freighted south along the Newell Highway. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
The brief Echuca actually sets
Older housing stock means walls that are not straight and ceilings that are not level, and a catalogue kitchen deals with both by filling the gap with a panel. Cutting to the measured room is the difference between a kitchen that fits and one that has been made to fit. Orchard and dairy country with big family houses and a practical view of what a kitchen needs to be.
The run to Echuca
Your kitchen is cut in Rockhampton and freighted south along the Newell Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Echuca
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Victoria that is the Victorian Building Authority. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What ships with the order
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Echuca plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
Benchtops, and why they are separate
Laminate ships with the kitchen. Stone does not, and it should not: a stone benchtop is templated off the cabinets after they are installed and level, by a fabricator near you in Echuca, because a slab cut to a drawing rather than to the room is a slab that does not fit. We quote the cabinetry and the laminate; for stone we tell you the cut-out sizes and the fabricator works from the installed run.
A kitchenette instead of a kitchen
If the room in Echuca is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Around the Goulburn Valley
We ship to Shepparton, Benalla, Wangaratta, Seymour on the same route. The the Goulburn Valley page covers the region, and Victoria covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Echuca
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Victoria.
The specification
Built for this
climate, not a catalogue.
Cold mornings and hot afternoons in the same day are hard on a cabinet. Materials expand and contract, glued edging works loose at the corners, and doors drift out of alignment. A fused edge and three-way adjustable Blum hinges are the answer to both halves of that.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Echuca — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Echuca?
Yes. Echuca is served south along the Newell Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Echuca?
No. Our own installation team works Central Queensland only. In Echuca your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Echuca?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Goulburn Valley orders go flat.
Who can do the plumbing and electrical in Echuca?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Victoria, the Victorian Building Authority is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Echuca?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Drawer fronts aligned on the bench, not on site
Full-height stone splashback
Long island, one delivery
Echuca, VIC
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Echuca kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.