Flat pack or assembled,
delivered to Sandgate.
A kitchen is not a product you pick off a shelf and hope fits. Send us what the room actually measures and we will draw Sandgate a kitchen to those numbers, then price it with nothing hidden in it.
The short answer
We supply Sandgate, we do not install there. The cabinetry is cut to your wall lengths and ceiling height rather than selected from catalogue widths, then freighted south along the Bruce Highway as flat cartons or as assembled cabinets, whichever your quote compares better on. Specification is the same either way and the same in every state: 18mm moisture-resistant board, laser-bonded edging, Blum hinges and full-extension runners.
What should a Sandgate kitchen be built to survive?
Near the water it is never the doors that go first, it is everything that moves. Salt finds the cheapest component in the kitchen and works on it. Specifying the hardware properly at the start is most of what a coastal kitchen needs. Freight lands daily, which makes Brisbane the cheapest capital for us to reach and the easiest place to compare our quote against a local one.
What does delivery to Sandgate involve?
Your kitchen is cut in Rockhampton and freighted south along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Sandgate?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What is the hardest part of building it yourself?
Not the cabinets. Each one is pre-drilled and labelled and goes together without much argument. The hard parts are the ones no instruction sheet covers: getting a long run level on a floor that is not, fixing securely to the wall you actually have, and setting the gaps between doors so they read straight. If that sounds like a bad weekend, the same kitchen can arrive delivered assembled.
How do I measure from Sandgate with nobody visiting?
Because we do not visit Sandgate, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Can I change the drawing after I approve it?
Before it is cut, yes, and changes at that stage cost nothing but time. Once the panels are cut they are cut to your sizes and cannot be re-used on another job, which is why the approval step exists and why we would rather you took an extra week over it. Read the elevations as carefully as the plan: most late changes are about where a door swings or which side of the sink the dishwasher sits, and both are obvious on the elevation.
Where else do you ship in Greater Brisbane?
We ship to Ipswich, Logan, the Redlands, Caboolture, Redcliffe, Springfield, North Lakes, Strathpine and the rest of the region on the same route. The Greater Brisbane page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Sandgate
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
The humid months do the damage quietly: water tracks along a glued edge, lifts it, and the board underneath drinks it. A laser-bonded edge has no seam for that to start in, which is why every panel we send is finished that way.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Sandgate — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Sandgate?
Yes. Sandgate is served south along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Sandgate?
No. Our own installation team works Central Queensland only. In Sandgate your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Sandgate?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Brisbane orders go flat.
Who can do the plumbing and electrical in Sandgate?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Sandgate?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Service drawings for your trades
Rangehood set into assembled overheads
Island with seating overhang
Sandgate, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Sandgate kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.