A kitchen drawn for Tumbarumba,
not for a catalogue.
Cut to your wall lengths and your ceiling height, pre-drilled, labelled per cabinet and freighted to Tumbarumba flat or assembled. You decide which after you see both on the same quote.
The short answer
Yes — Tumbarumba is on the network. Your kitchen is drawn from your own measurements, cut in Rockhampton and freighted south along the Hume Highway, either flat packed or delivered assembled with the doors already hung. Every cabinet is 18mm moisture-resistant board with laser-bonded edging and Blum soft-close hardware. We do not install in Tumbarumba: your builder, carpenter or installer fits it from the dimensioned drawings that ship with the order, and a licensed plumber and electrician do their parts.
What is a kitchen up against in Tumbarumba?
Kitchens here sit cold and closed out of season, then get used hard for a few intense weeks. Temperature cycling like that is what lifts glued edging and loosens cheap hinges. Alpine and near-alpine housing, where kitchens are used hard in season and left cold and empty out of it.
How is a Tumbarumba order freighted?
Your kitchen is cut in Rockhampton and freighted south along the Hume Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Tumbarumba?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What cabinet sizes should I be asking for?
You should not have to ask: the run is drawn to your wall, so the cabinet widths come out of the measurement rather than being chosen from a list. What is worth deciding is the split between drawers and cupboards, because that is the difference you live with. Our cabinet sizes guide covers the standard dimensions that do matter, such as bench height and overhead clearance.
What does the quote actually itemise?
Every cabinet as its own line with its width and what is in it, the benchtop by material and linear metre, the hardware by brand, the doors by finish, and freight to your Tumbarumba postcode on a line of its own. No allowances, no provisional sums, no "from" price with the catches left out. If you take an item off, you see exactly what comes off the total, which is the point of itemising it in the first place.
How do I compare this with a Tumbarumba cabinetmaker?
Take our itemised quote to any Tumbarumba cabinetmaker and compare it line for line, which is exactly what it is formatted for. Ask them three things: board thickness and moisture rating, edging method, hardware brand. If the answers match ours and the number is better, take theirs - a local supplier with the same specification and no freight line is a genuinely good outcome. If the answers are vague, you have learned something either way.
Where else do you ship in the Southern Tablelands and Snowy?
We ship to Goulburn, Queanbeyan, Yass, Cooma, Jindabyne, Bowral, Moss Vale, Mittagong and the rest of the region on the same route. The the Southern Tablelands and Snowy page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Tumbarumba
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Kitchens here are warm and steamy for a few hours and cold for the rest. That cycling is what lifts glued edging off a panel, and it is the single best argument for the specification we ship as standard.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Tumbarumba — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Tumbarumba?
Yes. Tumbarumba is served south along the Hume Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Tumbarumba?
No. Our own installation team works Central Queensland only. In Tumbarumba your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Tumbarumba?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Southern Tablelands and Snowy orders go flat.
Who can do the plumbing and electrical in Tumbarumba?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Tumbarumba order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Drawer fronts aligned on the bench, not on site
Service drawings for your trades
New build, kitchen fitted at fit-off
Tumbarumba, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Tumbarumba kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.