Crookwell kitchens,
cut to your room.
Every Crookwell order ships with a numbered plan, elevations and a service drawing marking every waste, water point and outlet, so your plumber and electrician are not guessing.
The short answer
Yes, we ship to Crookwell. The kitchen is drawn to your measurements, cut in Rockhampton and freighted south along the Hume Highway. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
Why does the specification matter in Crookwell?
Out here a missing bracket is not an inconvenience, it is a fortnight. Everything is packed against a numbered drawing and checked before it leaves, because the cost of getting it wrong is measured in distance rather than dollars. Alpine and near-alpine housing, where kitchens are used hard in season and left cold and empty out of it.
How does it reach Crookwell?
Your kitchen is cut in Rockhampton and freighted south along the Hume Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Crookwell?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
How do I plan around the plumbing I already have?
Keeping the sink and the waste where they are is the single cheapest decision available in a kitchen renovation, and moving them is the one most likely to find a problem inside a wall. If the layout works with the existing points, keep them. If it does not, get the plumber to look before the drawing is approved rather than after the cabinets land in Crookwell.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
What actually ships with the order?
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Crookwell plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
Where else do you ship in the Southern Tablelands and Snowy?
We ship to Goulburn, Queanbeyan, Yass, Cooma, Jindabyne, Bowral, Moss Vale, Mittagong and the rest of the region on the same route. The the Southern Tablelands and Snowy page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Crookwell
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
The cold itself is not the problem. The problem is the damp that comes with it, settling in the parts of a kitchen that never get looked at until a door stops closing. Moisture-resistant board and a fused edge are specified for those places.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Crookwell — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Crookwell?
Yes. Crookwell is served south along the Hume Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Crookwell?
No. Our own installation team works Central Queensland only. In Crookwell your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Crookwell?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Southern Tablelands and Snowy orders go flat.
Who can do the plumbing and electrical in Crookwell?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Crookwell?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Drawer fronts aligned on the bench, not on site
Rangehood set into assembled overheads
Navy cabinetry, open-plan island
Crookwell, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Crookwell kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.