A kitchen for Bellingen,
drawn to your walls.
Cut to your wall lengths and your ceiling height, pre-drilled, labelled per cabinet and freighted to Bellingen flat or assembled. You decide which after you see both on the same quote.
The short answer
A Bellingen kitchen is quoted from your measurements and photographs, not from a site visit, and the quote is fixed and itemised with freight shown as its own line. It is cut in Rockhampton and ships south along the Pacific Highway. You choose flat packed or delivered assembled on the same drawing. Fitting is done by your own trades — our installation team works Central Queensland only.
What is a kitchen up against in Bellingen?
These kitchens are photographed once and used hard forever after. We would rather put the money into the carcass and the hardware and let the finish do the talking, because the photograph does not get retaken. Retirement and holiday-let building, which means kitchenettes and compact kitchens outnumber full renovations.
How is a Bellingen order freighted?
Your kitchen is cut in Rockhampton and freighted south along the Pacific Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Bellingen?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in New South Wales that is NSW Fair Trading. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What goes wrong with cheap cabinetry first?
In a predictable order: the edging lifts near the sink and the dishwasher, then water gets into the exposed core and the panel swells, then the drawer runners start to drag, then the doors stop lining up because the hinges have no adjustment left. None of that is bad luck. It is what 16mm standard-core board with glued edging and unbranded hardware does, and it is the reason we do not sell it.
Flat pack or assembled — which works out cheaper?
The cabinetry price is identical. What differs is the assembly line on the quote and the freight line, because assembled cabinets take several times the truck space of the same kitchen in cartons. To Bellingen that difference is usually decisive, and most orders this far out go flat. But the quote shows both, so it is a number you compare rather than a decision you are talked into.
What if the walls in Bellingen are not square?
They will not be. Almost no wall in any house is, which is why every run is drawn with scribe allowance at the ends and why we ask for wall measurements at three heights rather than one. The scribe pieces are the strips that take up the difference between a square cabinet and a wall that leans. They ship with the order, and your installer cuts them to the wall on the day.
Where else do you ship in the Mid North Coast?
We ship to Coffs Harbour, Port Macquarie, Taree, Kempsey, Forster, Nambucca Heads, Wauchope, Laurieton and the rest of the region on the same route. The the Mid North Coast page covers the region, and New South Wales covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Bellingen
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in New South Wales.
The specification
Built for this
climate, not a catalogue.
Summers here are humid enough that the cheap end of flat pack fails at the sink and dishwasher first, usually inside five years. Moisture-resistant board and laser-bonded edging are standard on every cabinet we cut.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Bellingen — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Bellingen?
Yes. Bellingen is served south along the Pacific Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Bellingen?
No. Our own installation team works Central Queensland only. In Bellingen your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Bellingen?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Mid North Coast orders go flat.
Who can do the plumbing and electrical in Bellingen?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In New South Wales, NSW Fair Trading is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Bellingen quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Full-height stone splashback
Rangehood set into assembled overheads
Appliance garage, hardware fitted before delivery
Bellingen, NSW
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Bellingen kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.