A kitchen for Augusta,
drawn to your walls.
Cut to your wall lengths and your ceiling height, pre-drilled, labelled per cabinet and freighted to Augusta flat or assembled. You decide which after you see both on the same quote.
The short answer
Yes, we ship to Augusta. The kitchen is drawn to your measurements, cut in Rockhampton and freighted west across the Nullarbor. You choose flat packed or delivered assembled on the same quote, and your own trades fit it — we install in Central Queensland only. Nothing is due to see the drawing or the price, and nothing is cut until you sign the drawing off.
What is a kitchen up against in Augusta?
A house within reach of sea air is a harder brief than it looks: the finish has to survive the light and the hardware has to survive the salt. We answer the second with Blum on every hinge and runner, and the first with a finish you choose off real samples. Wine country and surf coast, with a short intense holiday season and a long quiet one.
How is a Augusta order freighted?
Your kitchen is cut in Rockhampton and freighted west across the Nullarbor. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Augusta?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Western Australia that is the WA Building and Energy division. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Would a kitchenette suit the room better?
If the room in Augusta is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Augusta council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
How do I measure from Augusta with nobody visiting?
Because we do not visit Augusta, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Where else do you ship in the South West?
We ship to Bunbury, Busselton, Margaret River, Dunsborough, Collie, Manjimup, Australind, Harvey and the rest of the region on the same route. The the South West page covers the region, and Western Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Augusta
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Western Australia.
The specification
Built for this
climate, not a catalogue.
Four real seasons means four cycles of movement a year. Over a decade that is what separates a kitchen that still closes properly from one that does not, and it is decided by the edging and the hinge, not by the door colour.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Augusta — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Augusta?
Yes. Augusta is served west across the Nullarbor, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Augusta?
No. Our own installation team works Central Queensland only. In Augusta your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Augusta?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the South West orders go flat.
Who can do the plumbing and electrical in Augusta?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Western Australia, the WA Building and Energy division is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Augusta quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Stone on a compact run
Kitchenette, delivered assembled
Timber island, stone top
Augusta, WA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Augusta kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.