Salisbury orders,
cut to the millimetre.
No showroom, no design portal and no catalogue of fixed widths. You send the measurements and the photographs, a designer draws your Salisbury kitchen, and the quote comes back fixed and itemised with freight on its own line.
The short answer
Yes — Salisbury is on the network. Your kitchen is drawn from your own measurements, cut in Rockhampton and freighted west via the Barrier and Sturt highways, either flat packed or delivered assembled with the doors already hung. Every cabinet is 18mm moisture-resistant board with laser-bonded edging and Blum soft-close hardware. We do not install in Salisbury: your builder, carpenter or installer fits it from the dimensioned drawings that ship with the order, and a licensed plumber and electrician do their parts.
What does Salisbury housing do to a kitchen?
Tight entries, shared driveways and a lift if you are lucky. Measuring the path from the truck to the room matters as much as measuring the room, and it is the question that usually decides flat pack over assembled on these jobs. A lot of 1960s and 70s houses on generous blocks, which is why second dwellings and garage conversions come up so often here.
How does the kitchen get to Salisbury?
Your kitchen is cut in Rockhampton and freighted west via the Barrier and Sturt highways. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Salisbury?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in South Australia that is SA Consumer and Business Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Salisbury council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
Where should the cartons sit before the trades arrive?
Somewhere dry, flat and off a concrete slab. Packed panels are fine stored flat and stacked, and they are not fine leaning against a wall for a fortnight or sitting where a slab can wick moisture into them. A garage on timber bearers or a couple of pallets is ideal. Open the cartons and check them against the drawing when they arrive, then close them again.
What suits a granny flat or a rental in Salisbury?
A good share of what we ship to Salisbury goes into secondary dwellings, granny flats and rentals. Those kitchens fail in a predictable order - edging near the sink, then drawer runners, then hinge adjustment - and all three are specification, not bad luck. The board, edging and hardware we ship as standard are chosen so the rental kitchen and the owner kitchen are the same kitchen.
Where else do you ship in Greater Adelaide?
We ship to Gawler, Mount Barker, Victor Harbor, Aldinga, Elizabeth, Glenelg, Noarlunga, Strathalbyn and the rest of the region on the same route. The Greater Adelaide page covers the region, and South Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Salisbury
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in South Australia.
The specification
Built for this
climate, not a catalogue.
Four real seasons means four cycles of movement a year. Over a decade that is what separates a kitchen that still closes properly from one that does not, and it is decided by the edging and the hinge, not by the door colour.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Salisbury — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Salisbury?
Yes. Salisbury is served west via the Barrier and Sturt highways, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Salisbury?
No. Our own installation team works Central Queensland only. In Salisbury your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Salisbury?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Adelaide orders go flat.
Who can do the plumbing and electrical in Salisbury?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In South Australia, SA Consumer and Business Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Salisbury?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Laser-bonded edging, no glue line
Rangehood set into assembled overheads
Galley layout for a narrow room
Salisbury, SA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Salisbury kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.