Flat pack or assembled,
delivered to Port MacDonnell.
The cabinetry that goes into a Port MacDonnell kitchen is the same cabinetry we put in our own installed jobs: 18mm moisture-resistant board, laser-bonded edging, Blum hardware. What differs is that your trades fit it rather than ours.
The short answer
We supply Port MacDonnell, we do not install there. The cabinetry is cut to your wall lengths and ceiling height rather than selected from catalogue widths, then freighted west via the Western and Princes highways as flat cartons or as assembled cabinets, whichever your quote compares better on. Specification is the same either way and the same in every state: 18mm moisture-resistant board, laser-bonded edging, Blum hinges and full-extension runners.
What brief does Port MacDonnell actually set?
Near the water it is never the doors that go first, it is everything that moves. Salt finds the cheapest component in the kitchen and works on it. Specifying the hardware properly at the start is most of what a coastal kitchen needs. Cool, wet winters and a strong renovation market in the older timber housing stock.
What is the run to Port MacDonnell?
Your kitchen is cut in Rockhampton and freighted west via the Western and Princes highways. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Port MacDonnell?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in South Australia that is SA Consumer and Business Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
Would a kitchenette suit the room better?
If the room in Port MacDonnell is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Can you match something I have already seen?
Usually, if what you like is the door, the colour and the proportion rather than a specific brand's product. Send photographs with the quote request and say what it is you are responding to in them, because that is more useful than a style name. Our styles guide works through the eighteen looks people ask for most and what each one actually needs.
Where else do you ship in the Limestone Coast?
We ship to Mount Gambier, Naracoorte, Millicent, Penola, Robe, Bordertown on the same route. The the Limestone Coast page covers the region, and South Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Port MacDonnell
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in South Australia.
The specification
Built for this
climate, not a catalogue.
The seasonal swing here moves timber and board more than a steady climate does, and the joint that gives first is almost always the edge. Laser-bonded edging is fused to the panel rather than glued to it, so there is no seam to lift.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Port MacDonnell — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Port MacDonnell?
Yes. Port MacDonnell is served west via the Western and Princes highways, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Port MacDonnell?
No. Our own installation team works Central Queensland only. In Port MacDonnell your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Port MacDonnell?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Limestone Coast orders go flat.
Who can do the plumbing and electrical in Port MacDonnell?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In South Australia, SA Consumer and Business Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Port MacDonnell?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Rangehood set into assembled overheads
Samples brought to you
Timber island, stone top
Port MacDonnell, SA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Port MacDonnell kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.