Measured in Paringa,
made to those numbers.
No showroom, no design portal and no catalogue of fixed widths. You send the measurements and the photographs, a designer draws your Paringa kitchen, and the quote comes back fixed and itemised with freight on its own line.
The short answer
Kitchens for Paringa are drawn in Rockhampton from the measurements you send, approved by you before anything is cut, then packed flat or assembled and freighted west via the Sturt Highway. The quote itemises every cabinet, the benchtop by material and metre, the hardware by brand and the freight separately. We supply only — your trades install it.
What does Paringa housing do to a kitchen?
Farm houses take a kind of use that suburban kitchens do not — boots, buckets, big cooking, and a back door that is really the front door. The specification we ship assumes that rather than hoping otherwise. Irrigation country: hot, dry, hard water, and a lot of housing built for workers rather than for looking at.
How does the kitchen get to Paringa?
Your kitchen is cut in Rockhampton and freighted west via the Sturt Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Paringa?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in South Australia that is SA Consumer and Business Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What is the hardest part of building it yourself?
Not the cabinets. Each one is pre-drilled and labelled and goes together without much argument. The hard parts are the ones no instruction sheet covers: getting a long run level on a floor that is not, fixing securely to the wall you actually have, and setting the gaps between doors so they read straight. If that sounds like a bad weekend, the same kitchen can arrive delivered assembled.
How do I measure from Paringa with nobody visiting?
Because we do not visit Paringa, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Paringa council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
Where else do you ship in the Riverland?
We ship to Berri, Renmark, Loxton, Waikerie, Barmera, Morgan on the same route. The the Riverland page covers the region, and South Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Paringa
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in South Australia.
The specification
Built for this
climate, not a catalogue.
Hard water marks stone and laminate alike, and dry heat opens up any joint that was not tight to begin with. Neither is solved by a prettier door; both are answered by the board, the edge and the hardware underneath.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Paringa — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Paringa?
Yes. Paringa is served west via the Sturt Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Paringa?
No. Our own installation team works Central Queensland only. In Paringa your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Paringa?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Riverland orders go flat.
Who can do the plumbing and electrical in Paringa?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In South Australia, SA Consumer and Business Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Paringa quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Service drawings for your trades
Kitchenette, delivered assembled
Galley layout for a narrow room
Paringa, SA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Paringa kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.