Morgan orders,
cut to the millimetre.
Cut to your wall lengths and your ceiling height, pre-drilled, labelled per cabinet and freighted to Morgan flat or assembled. You decide which after you see both on the same quote.
The short answer
Kitchens for Morgan are drawn in Rockhampton from the measurements you send, approved by you before anything is cut, then packed flat or assembled and freighted west via the Sturt Highway. The quote itemises every cabinet, the benchtop by material and metre, the hardware by brand and the freight separately. We supply only — your trades install it.
What is a kitchen up against in Morgan?
Out here a missing bracket is not an inconvenience, it is a fortnight. Everything is packed against a numbered drawing and checked before it leaves, because the cost of getting it wrong is measured in distance rather than dollars. Irrigation country: hot, dry, hard water, and a lot of housing built for workers rather than for looking at.
How is a Morgan order freighted?
Your kitchen is cut in Rockhampton and freighted west via the Sturt Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Morgan?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in South Australia that is SA Consumer and Business Services. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
How do I measure from Morgan with nobody visiting?
Because we do not visit Morgan, your measurements are the drawing. Wall to wall at three heights and use the smallest number. Ceiling height in every corner, because floors are never level. Every window and door with its distance from the nearest corner. Where the waste, the water and the power are now. Then a photograph of each corner of the room. Our measuring guide lists the lot, and a designer checks your numbers against the photographs before anything is cut.
What actually ships with the order?
A numbered plan and elevations, a service drawing marking every waste, water point and outlet for your Morgan plumber and electrician, the hardware bagged per cabinet, kickboards and end panels cut to length, and fillers where the room needs them. Nothing on that list is an extra. The service drawing in particular is what stops a cabinet being cut on site to clear a pipe nobody planned for.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
Where else do you ship in the Riverland?
We ship to Berri, Renmark, Loxton, Waikerie, Barmera, Paringa on the same route. The the Riverland page covers the region, and South Australia covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Morgan
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in South Australia.
The specification
Built for this
climate, not a catalogue.
Dry heat, dust and hard water are the local test. Dry heat shrinks poorly-made joints and dust finds its way into cheap runners until they grate. Blum runners and hinges are sealed and carry a lifetime mechanical warranty, which is why we fit nothing else.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Morgan — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Morgan?
Yes. Morgan is served west via the Sturt Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Morgan?
No. Our own installation team works Central Queensland only. In Morgan your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Morgan?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Riverland orders go flat.
Who can do the plumbing and electrical in Morgan?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In South Australia, SA Consumer and Business Services is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Can I see a sample before ordering in Morgan?
Yes. Door, board and edging samples are posted out, and for most people that settles the colour question better than a screen does. Ask when you send the dimensions through.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Black joinery, marble bar
Service drawings for your trades
Timber island, stone top
Morgan, SA
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Morgan kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.