A kitchen drawn for Normanton,
not for a catalogue.
No showroom, no design portal and no catalogue of fixed widths. You send the measurements and the photographs, a designer draws your Normanton kitchen, and the quote comes back fixed and itemised with freight on its own line.
The short answer
Kitchens for Normanton are drawn in Rockhampton from the measurements you send, approved by you before anything is cut, then packed flat or assembled and freighted west via the Capricorn Highway. The quote itemises every cabinet, the benchtop by material and metre, the hardware by brand and the freight separately. We supply only — your trades install it.
What does Normanton housing do to a kitchen?
As the service town for the district, the housing here runs from century-old cottages to new estate builds, and almost none of it suits a catalogue cabinet width. Every run we cut is drawn to the wall it is going on. Freight is the whole conversation out here, and flat cartons are the only version of this that makes financial sense.
How does the kitchen get to Normanton?
Your kitchen is cut in Rockhampton and freighted west via the Capricorn Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Normanton?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Would a kitchenette suit the room better?
If the room in Normanton is a studio, a granny flat, an under-house conversion or a short-stay unit, a kitchenette may be the right answer and it starts at $4,500. Sink, bench, cold storage, and a cooktop where the run allows. Same carcasses and the same Blum hardware as a full kitchen, in a fraction of the length - and it fits through a doorway that a full run would not.
Who gets the cartons off the truck in Normanton?
You do, or whoever you arrange. Freight to a residential address is generally kerbside, and a kitchen is a lot of cartons, several of them long and heavy enough to want two people. Builders usually have this handled. If you are doing it yourself, line up help and somewhere dry for the cartons before the delivery date rather than on the day.
Is it worth ordering spare parts with the kitchen?
A spare hinge or two and a length of matching edging, yes, and they cost very little alongside the kitchen. Years later a door that takes a knock is a five minute fix if the part is in a drawer and a much longer one if it has to be matched to a finish that may have moved on. Ask for it to be added as a line on the quote rather than assuming it is included.
Where else do you ship in Outback Queensland?
We ship to Mount Isa, Longreach, Charleville, Barcaldine, Cloncurry, Winton, Blackall, Quilpie and the rest of the region on the same route. The Outback Queensland page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Normanton
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
Dry heat, dust and hard water are the local test. Dry heat shrinks poorly-made joints and dust finds its way into cheap runners until they grate. Blum runners and hinges are sealed and carry a lifetime mechanical warranty, which is why we fit nothing else.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Normanton — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Normanton?
Yes. Normanton is served west via the Capricorn Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Normanton?
No. Our own installation team works Central Queensland only. In Normanton your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Normanton?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Outback Queensland orders go flat.
Who can do the plumbing and electrical in Normanton?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Normanton order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Laser-bonded edging, no glue line
Service drawings for your trades
Galley layout for a narrow room
Normanton, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Normanton kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.