A kitchen drawn for Montville,
not for a catalogue.
No showroom, no design portal and no catalogue of fixed widths. You send the measurements and the photographs, a designer draws your Montville kitchen, and the quote comes back fixed and itemised with freight on its own line.
The short answer
Kitchens for Montville are drawn in Rockhampton from the measurements you send, approved by you before anything is cut, then packed flat or assembled and freighted south along the Bruce Highway. The quote itemises every cabinet, the benchtop by material and metre, the hardware by brand and the freight separately. We supply only — your trades install it.
What does Montville housing do to a kitchen?
Short-stay and weekender properties get judged on a photograph and then punished by turnover. That combination wants a kitchen that looks like a magazine and behaves like a rental. Coastal humidity plus a renovation market that expects a stone benchtop as a starting point rather than an upgrade.
How does the kitchen get to Montville?
Your kitchen is cut in Rockhampton and freighted south along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Montville?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Flat pack or assembled — which works out cheaper?
The cabinetry price is identical. What differs is the assembly line on the quote and the freight line, because assembled cabinets take several times the truck space of the same kitchen in cartons. To Montville that difference is usually decisive, and most orders this far out go flat. But the quote shows both, so it is a number you compare rather than a decision you are talked into.
Who gets the cartons off the truck in Montville?
You do, or whoever you arrange. Freight to a residential address is generally kerbside, and a kitchen is a lot of cartons, several of them long and heavy enough to want two people. Builders usually have this handled. If you are doing it yourself, line up help and somewhere dry for the cartons before the delivery date rather than on the day.
Is it worth ordering spare parts with the kitchen?
A spare hinge or two and a length of matching edging, yes, and they cost very little alongside the kitchen. Years later a door that takes a knock is a five minute fix if the part is in a drawer and a much longer one if it has to be matched to a finish that may have moved on. Ask for it to be added as a line on the quote rather than assuming it is included.
Where else do you ship in the Sunshine Coast?
We ship to Maroochydore, Noosa, Nambour, Buderim, Coolum Beach, Caloundra, the Gympie region, Maleny and the rest of the region on the same route. The the Sunshine Coast page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Montville
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
Between the humidity and the summer storms, the parts of a kitchen that suffer here are the ones nobody photographs — the sink cabinet floor, the edge behind the dishwasher. Moisture-resistant board is specified for exactly those.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Montville — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Montville?
Yes. Montville is served south along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Montville?
No. Our own installation team works Central Queensland only. In Montville your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Montville?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Sunshine Coast orders go flat.
Who can do the plumbing and electrical in Montville?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Montville order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Appliance garage, hardware fitted before delivery
Blum runners fitted before it leaves
Black joinery, marble bar
Montville, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Montville kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.