Flat pack kitchens
delivered to Berwick.
A kitchen is not a product you pick off a shelf and hope fits. Send us what the room actually measures and we will draw Berwick a kitchen to those numbers, then price it with nothing hidden in it.
The short answer
We supply Berwick, we do not install there. The cabinetry is cut to your wall lengths and ceiling height rather than selected from catalogue widths, then freighted south along the Newell and Hume highways as flat cartons or as assembled cabinets, whichever your quote compares better on. Specification is the same either way and the same in every state: 18mm moisture-resistant board, laser-bonded edging, Blum hinges and full-extension runners.
What should a Berwick kitchen be built to survive?
Access is usually the deciding factor here — townhouses, units, narrow hallways, stairs. A flat carton goes where an assembled cabinet cannot, and it is often the only way to get a full kitchen into the room without taking a window out. The most competitive flat pack market in the country, and the one where the board and hardware specification is worth reading twice.
What does delivery to Berwick involve?
Your kitchen is cut in Rockhampton and freighted south along the Newell and Hume highways. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Berwick?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Victoria that is the Victorian Building Authority. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
Do I supply the appliances, or do you?
Most Berwick orders come with the appliances already chosen, and that is the easier way round. Send us the model numbers, or the cut-out dimensions from the spec sheet, and the cabinets are cut to take them. If you would rather we supplied them, they are quoted as their own lines. What does not work is guessing: a 900mm cooktop in a cabinet cut for 600mm is a new cabinet, not an adjustment.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Berwick council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
What goes wrong with cheap cabinetry first?
In a predictable order: the edging lifts near the sink and the dishwasher, then water gets into the exposed core and the panel swells, then the drawer runners start to drag, then the doors stop lining up because the hinges have no adjustment left. None of that is bad luck. It is what 16mm standard-core board with glued edging and unbranded hardware does, and it is the reason we do not sell it.
Where else do you ship in Greater Melbourne?
We ship to Werribee, Frankston, Dandenong, Ringwood, Craigieburn, Pakenham, Sunbury, Melton and the rest of the region on the same route. The Greater Melbourne page covers the region, and Victoria covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Berwick
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Victoria.
The specification
Built for this
climate, not a catalogue.
The seasonal swing here moves timber and board more than a steady climate does, and the joint that gives first is almost always the edge. Laser-bonded edging is fused to the panel rather than glued to it, so there is no seam to lift.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Berwick — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Berwick?
Yes. Berwick is served south along the Newell and Hume highways, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Berwick?
No. Our own installation team works Central Queensland only. In Berwick your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Berwick?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most Greater Melbourne orders go flat.
Who can do the plumbing and electrical in Berwick?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Victoria, the Victorian Building Authority is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Berwick order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Black joinery, marble bar
Drawer fronts aligned on the bench, not on site
Tall units arrive as built boxes
Berwick, VIC
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Berwick kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.