Measured in Beerwah,
made to those numbers.
Every Beerwah order ships with a numbered plan, elevations and a service drawing marking every waste, water point and outlet, so your plumber and electrician are not guessing.
The short answer
Yes — Beerwah is on the network. Your kitchen is drawn from your own measurements, cut in Rockhampton and freighted south along the Bruce Highway, either flat packed or delivered assembled with the doors already hung. Every cabinet is 18mm moisture-resistant board with laser-bonded edging and Blum soft-close hardware. We do not install in Beerwah: your builder, carpenter or installer fits it from the dimensioned drawings that ship with the order, and a licensed plumber and electrician do their parts.
Why does the specification matter in Beerwah?
Resale sits behind most kitchens in these suburbs, and a buyer reads a kitchen in about four seconds. What carries that is alignment: even gaps, doors that sit flush, drawers that close themselves. All three are hardware and assembly, not budget. Coastal humidity plus a renovation market that expects a stone benchtop as a starting point rather than an upgrade.
How does it reach Beerwah?
Your kitchen is cut in Rockhampton and freighted south along the Bruce Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Beerwah?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Queensland that is QBCC. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
Why is there no design portal to log into?
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Beerwah kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
Can you match something I have already seen?
Usually, if what you like is the door, the colour and the proportion rather than a specific brand's product. Send photographs with the quote request and say what it is you are responding to in them, because that is more useful than a style name. Our styles guide works through the eighteen looks people ask for most and what each one actually needs.
Where else do you ship in the Sunshine Coast?
We ship to Maroochydore, Noosa, Nambour, Buderim, Coolum Beach, Caloundra, the Gympie region, Maleny and the rest of the region on the same route. The the Sunshine Coast page covers the region, and Queensland covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Beerwah
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Queensland.
The specification
Built for this
climate, not a catalogue.
The humid months do the damage quietly: water tracks along a glued edge, lifts it, and the board underneath drinks it. A laser-bonded edge has no seam for that to start in, which is why every panel we send is finished that way.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Beerwah — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Beerwah?
Yes. Beerwah is served south along the Bruce Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Beerwah?
No. Our own installation team works Central Queensland only. In Beerwah your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Beerwah?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Sunshine Coast orders go flat.
Who can do the plumbing and electrical in Beerwah?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Queensland, QBCC is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
Is there a deposit to get a Beerwah quote?
No. The drawing and the itemised quote cost nothing and carry no obligation. Payment terms for the order itself are stated on that quote.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Full-height stone splashback
Samples brought to you
Island with seating overhang
Beerwah, QLD
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Beerwah kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.