Flat pack kitchens,
freighted into Point Lonsdale.
Point Lonsdale is one freight run from our door in Rockhampton. What arrives is a kitchen drawn for your room, in 18mm moisture-resistant board with Blum hardware throughout.
The short answer
Yes. Nothing about Point Lonsdale changes the product: 18mm moisture-resistant board, laser-bonded edging and Blum soft-close hardware on every cabinet, cut to your drawing and freighted south along the Hume Highway. What changes is the freight line on the quote and who fits it, because installation outside Central Queensland is your own builder or installer rather than us.
Why does the specification matter in Point Lonsdale?
Salt air is relentless on hardware. It gets into unbranded runners and hinges and they stiffen, then sag, and the doors stop lining up. Every cabinet runs Blum soft-close hinges and full-extension runners as standard. Salt-exposed coastal housing with a short, intense summer season for short-stay turnover.
How does it reach Point Lonsdale?
Your kitchen is cut in Rockhampton and freighted south along the Hume Highway. Flat cartons are labelled to a numbered drawing, one per cabinet where possible, with doors and fronts wrapped separately and the Blum hardware bagged against the cabinet it belongs to. Assembled orders arrive as finished boxes, doors hung and adjusted, which takes more truck space and shows as a higher freight line. Both are on the same quote so the choice is a number rather than a guess.
Who fits it in Point Lonsdale?
Your builder, carpenter or kitchen installer, plus a licensed plumber and a licensed electrician for their parts. Ask each for a licence number and check it yourself — in Victoria that is the Victorian Building Authority. Every order ships with dimensioned service drawings showing each waste, water point and outlet, so the trades rough in to the plan rather than to a guess. Our install guide sets out the three trades and the fixed order they work in.
What should be ready before the kitchen lands?
The old kitchen out, the floor as level as it is going to get, walls patched and painted where the cabinets will not cover them, and the plumber and electrician booked for the days after the fit rather than the same day. Painting after the cabinetry is in is slower and the cut-in never looks as good. Our installation guide sets out the order of trades.
Why is there no design portal to log into?
Plenty of suppliers hand you a portal and let the software approve your own mistakes. We do not. A designer in Rockhampton draws your Point Lonsdale kitchen from your measurements and photographs, and catches the things software does not: the window reveal that stops an overhead, the door swing that fouls the fridge, the floor that falls 30mm across the run. You see the drawing before you pay anything.
Do I need council approval to replace a kitchen?
Replacing a kitchen in the same footprint is generally not something that needs approval on its own, but moving plumbing or structural work can change that, and it is your local council that decides, not us. Check with the Point Lonsdale council directly before you commit to a layout that moves the sink. If the kitchen is going into a new secondary dwelling the approval question is a different and much bigger one.
Where else do you ship in the Bellarine and Surf Coast?
We ship to Torquay, Ocean Grove, Lorne, Anglesea, Barwon Heads, Drysdale, Portarlington, Queenscliff and the rest of the region on the same route. The the Bellarine and Surf Coast page covers the region, and Victoria covers the state.
- Drawn to your measurements, not catalogue widths
- 18mm moisture-resistant board, laser-bonded edging
- Blum soft-close hinges and full-extension runners
- Pre-drilled and labelled per cabinet
- Service drawings for your plumber and electrician
- Fixed itemised quote, freight its own line
- Installation not offered in Point Lonsdale
Kitchenettes for a granny flat, studio or short-stay unit start at $4,500 — see flat pack kitchenettes.
Building a second dwelling? Granny flat rules in Victoria.
The specification
Built for this
climate, not a catalogue.
Four real seasons means four cycles of movement a year. Over a decade that is what separates a kitchen that still closes properly from one that does not, and it is decided by the edging and the hinge, not by the door colour.
The same three questions decide any kitchen anywhere: board thickness and moisture rating, edging method, hardware brand. Ours are 18mm moisture-resistant, laser-bonded and Blum, and they are printed on every quote. How to judge a flat pack.
- 18mm moisture-resistant board
- Laser-bonded edging, no glue line
- Blum soft-close hinges and runners
- Cut to your drawing, not catalogue widths
- Pre-drilled and labelled per cabinet
- Fixed itemised quote, freight its own line
No showroom. No account.
A person draws it.
Send the wall lengths, the ceiling height and a photo of each corner. A designer draws your kitchen to the room and sends the drawing back with a fixed, itemised quote — flat packed and delivered assembled, freight to your postcode on each.
- Nothing to pay to see the drawing or the quote
- Changes redrawn until the plan is right
- Cut only after you sign the drawing off
- Freight quoted as its own line, never folded in
Or call 0401 821 848 — you get the person who designs it.
Frequently asked
Point Lonsdale — questions
If your question is not here, call the studio. We would rather talk it through than have you guess.
Ask us directly →Do you deliver flat pack kitchens to Point Lonsdale?
Yes. Point Lonsdale is served south along the Hume Highway, and freight is quoted to your postcode as its own line on the quote rather than folded into the cabinetry price.
Do you install kitchens in Point Lonsdale?
No. Our own installation team works Central Queensland only. In Point Lonsdale your builder, carpenter or kitchen installer fits it, working from the dimensioned service drawings that ship with every order. Our install guide covers the three trades and the order they work in.
Should I order flat pack or assembled to Point Lonsdale?
Both are quoted on the same drawing. Flat cartons ship for less and get through tight doorways; assembled arrives with carcasses built and doors adjusted so your installer is fitting rather than building. Over this distance most the Bellarine and Surf Coast orders go flat.
Who can do the plumbing and electrical in Point Lonsdale?
A licensed plumber and a licensed electrician, and you should check both licences yourself before they start. In Victoria, the Victorian Building Authority is the register to check against.
What board and hardware do you use?
18mm moisture-resistant board, laser-bonded edging and Blum soft-close hinges and runners on every cabinet, in every state. The specification is printed on your quote so you can hold it against anything else you are offered.
How long will a Point Lonsdale order take?
It depends on the kitchen and the freight route, so it is stated on your quote for your job rather than guessed here. What you can plan around is the sequence: drawing, your sign-off, cutting, then freight.
Delivered assembled
The assembly is done
before it arrives.
Carcasses built square on a bench, Blum hardware fitted, doors hung and adjusted to even gaps. On site you are fixing finished cabinets to a wall, not building them on the floor. Your builder or installer levels it, fixes it and fits the benchtop, working from our drawings. Prefer to build it yourself? The same kitchen ships flat pack.
Appliance garage, hardware fitted before delivery
Full-height stone splashback
Concrete-look doors, matte black hardware
Point Lonsdale, VIC
Send us the dimensions.
We will send back a number.
A fixed, itemised quote for your Point Lonsdale kitchen, flat packed and delivered assembled, with freight to your postcode on each. Nothing to pay to see it.